
Roller burnishing tools
Roller burnishing tools
The combined skive burnishing tool can process cylindrical tubes and other workpieces in a short time, and can be processed in one operation.
Since the scraping and rolling can only work in one direction, the cutting and rolling process is completed in one operation.
Using a machine-determined conversion system, the tool can be quickly rolled back without compromising the finished scraping surface.
Product advantages:
●Surface quality reached Rz<1um
●Extremely high dimensional stability with tolerance class IT8
●Assembly surface processing is safe and fast and low cost.
●The surface is harder and more wear-resistant after rolling
●Non-cutting, low noise
Product description:
●Processing
●diameter:60-440mm
●Scraping speed:2-3m/min
●Max. machining allowance:1mm
●Feed rate:3-6mm/r

Reachable precision and performance
Summary of performance
Skiving
• Surface finish Ra= 4-10 μm, Rt= 20-60 μm, at normal feeds (1-6 mm/rev) and a speed of vc: 150-300 m/min.
• Lower feeds improve the surface finish.
• The skiving tool determines the finished diameter and produces a very accurate finish from entrance to exit. On thin-walled tubes, elastic deformation from clamping and machining will influence the finished diameter.
• The skiving tool follows the inner diameter (ID) of the component which secures the straightness.
Roller Burnishing
• Surface finish Ra= 0.05-0.20 μm.
• If the tube is very thin-walled, the burnishing will not be as effective as for normal tubes with t/ID = 0.1. (Where t is wall thickness).
• The tolerance grade is IT8 or better. Strong clamping, crossholes or irregular tube shape can deform the tube in different ways. Uneven wall thickness can cause ovality.
• The surface hardness can be typically increased by up to 50%.
• Finish can be better than grinding or honing (but lacks oil retention).
