Skip to main content

Complete Solution for Deep hole drilling

BTA drilling: Drilling, Boring and Trepanning

BTA drilling Process : Drilling, Boring and Trepanning

BTA stands for Boring and Trepanning Association which developed this deep hole drilling system. It involves a single drill tube in which high pressure coolant is supplied to the drill through the annular area between the drilled hole and the tube outer diameter. The chips are evacuated through the I.D. of the tube. The drill head is screwed to this drill tube which is much stronger compared to the kidney shaped shank of a gun drill, hence much higher metal removal rates are possible. This involves the use of a Pressure head which is basically a high pressure seal between the workpiece and the drill bush. BTA/STS drilling is generally used for ф19 and above.
Since the chip removal is internal, no v shaped groove is required in the shank, so its cross-section is completely round and this provides more rigidity to the entire system. BTA drilling finds its application in Industries like Oil & Gas, Defence, Steel, Aircraft, Aerospace, Hydraulic Cylinders, and Power etc. For larger diameter deep hole drilling, BTA drilling is the only available option which provides high productivity and precision.
Another system which evolved from BTA single tube system is the Ejector drilling system. It is a system with twin tubes where the coolant is pumped through the space between the inner and outer tube. This eliminates the use of Pressure head and simplifies the system. This was introduced mainly to tool up conventional machines to do Deep hole Drilling.

Goto our BTA Drilling and Boring Machines

Deep Hole Drilling Tools

Affordable Quality BTA Deep Hole drilling Tools

Indexables

Profimach - Profidrill provides indexables from 40mm dia. to 500+mm dia. with cartridges for extra protection for the tool.

There are many combinations in which the cartridge and wear pad can be used to produce additional plus hole sizes.
All Indexable drills are shipped with assembly instructions, including a list of spare parts.

Sandvik-style Drill

Profimach - Profidrill provides a direct fit indexable tool.

The Drill is designed for the inserts to fit directly in the drill pocket meaning there are no cartridges in this drill.

Many customers prefer this style drill in smaller diameter drilling because it provides for better chip evacuation.

The inserts for this tool are interchangeable with the Corodrill 800 Sandvik-style Indexable that are still in use.
This tool is available for Single Tube (STS) and Double Tube Systems (DTS).
The drill is available in our style or Sandvik-style guide pads. This drill is available in 24 mm dia to 65mm dia.

Inserts for Deep Hole Drilling

Profimach - Profidrill provides inserts with standard and Special Chip Breakers available for difficult-to-cut materials.

Performs exceptionally well in Inconel, Stainless, 13 Chrome, P550, 4145, and many other materials.

This page is still under construction